Casiano Electric has served Bryan, Brazos County, and the surrounding area since 2005. We handle residential and commercial electrical work, from a single tripped breaker to a full service upgrade, and we bring the same care to every job regardless of size. When you call, you reach an electrician who knows this area and stands behind the work. Local crew. Real electrician on the phone. Quick to respond.
Call (979) 356-2994 for a quote today.
We've handled everything from a flickering light to a full rewire, and the everyday repair calls are just as important to us as the bigger jobs. If your lights are flickering, an outlet has gone dead, a breaker keeps tripping, or a switch stopped responding, those are signs something in the circuit needs attention. We diagnose the problem first, explain what we found, and get the repair done right. Our work covers standard outlet repair and replacement, GFCI and AFCI outlets, grounding and bonding checks when a repair reveals a deeper issue, and full electrical troubleshooting from the panel to the fixture.
Some electrical problems are easy to put off. Others are not. Burning smells near an outlet, a breaker that trips every time you use a specific appliance, or outlets that feel warm to the touch are all reasons to call the same day. Flickering lights throughout the house or a panel that makes buzzing sounds are worth scheduling quickly too. We offer same-day availability for urgent calls and can typically get to non-emergency repairs within the week. If something feels off with your electrical system, trust that instinct. Give us a call and we'll get the power sorted.
Adding an outlet in a room that never had one, replacing a worn receptacle, or upgrading to GFCI and AFCI protection where code requires it are all straightforward jobs we handle regularly. We install standard outlets, USB outlets, weatherproof exterior outlets, dimmer switches, smart switches, and light switch replacements. Whether you're updating a single outlet in the kitchen or adding exterior outlets for a patio or workshop, work performed by licensed electricians means it goes in correctly and passes inspection.
Good lighting changes how a space feels and functions. We install recessed and can lighting, LED fixtures, under-cabinet lighting, chandeliers, and pendant lights. Outside the home, we handle security lighting, motion-sensor lights, flood lighting, and landscape lighting for driveways, walkways, and outdoor living areas. Ceiling fan installation is one of our most common calls, including runs where there is no existing wiring in the ceiling. We handle the wiring, the switch, and the fan so the finished job is clean and safe. Call today and we'll set the appointment.
An older panel that cannot keep up with modern electrical demand is one of the most common issues we see in established homes and commercial buildings. We handle panel replacement, 200-amp service upgrades, fuse box to breaker panel conversions, subpanel installation, and service-entrance and meter upgrades. Before any panel work begins, we run a load calculation to make sure the new panel is sized correctly for the building's actual needs. No guesswork, no undersizing.
Older homes in the Bryan area sometimes still have knob-and-tube wiring or aluminum branch circuit wiring, both of which carry real safety and insurance concerns. We do whole-home rewiring, partial rewiring for additions or remodels, and targeted aluminum-wiring remediation. All wiring work is done to current code. If you are planning an addition or finishing a space, we handle the new wiring from rough-in through final inspection.
High-draw appliances need their own circuit. A refrigerator, washer, dryer, dishwasher, microwave, or electric range sharing a circuit with other loads is a recipe for tripped breakers and, in some cases, a fire hazard. We install dedicated circuits sized for the appliance, including 240-volt outlets for dryers and ranges. If you are adding a large appliance or upgrading to an electric range, call us before you plug it in. Reach out and an electrician will follow up.
Homeowners across Bryan count on us for repairs, panel upgrades, safety inspections, outlet and lighting installations, and the full range of residential electrical work. We treat your home and its wiring the way we would our own. That means careful work, clean jobsites, and honest answers about what we find. Whether you own a newer build or a home that has been standing for decades, we have seen the wiring challenges that come with both.
Small businesses, offices, retail spaces, and rental properties all have electrical needs that differ from a single-family home. We work with business owners and property managers on panel capacity, circuit additions, lighting upgrades, and code compliance. If you are opening a new location, renovating an existing space, or managing a property that needs electrical attention, we can handle the scope. We built this business here, and we stand behind every job. Give us a ring and consider it handled.
Texas weather demands a lot from a home's electrical system. Intense summer heat drives heavy cooling loads, severe thunderstorms roll through Brazos County with real regularity, and the occasional winter ice storm can knock out power for days. The three services below come up constantly for that reason, and we have built real experience around each of them.
An aging panel in a Bryan home often shows its limits during the hottest months, when air conditioning, appliances, and electronics are all running at once. Panels that were sized for a smaller load, or that use outdated fuse technology, simply cannot handle what a modern household draws. We assess the current panel, explain the options, and complete the upgrade with clear communication from the first call to the final test. When the job is done, you will know exactly what changed and why.
Texas power reliability has been a real concern in recent years. Severe storms can take out grid power for hours or days, and for families and businesses that depend on electricity for medical equipment, refrigeration, or just keeping the lights on, that is not a small inconvenience. We handle the electrical side of generator installation: running the wiring, installing the transfer switch, and making sure the connection to your panel is safe and code-compliant. We work with manual transfer switches, automatic transfer switches, and interlock kits depending on your setup and budget.
A power strip with a built-in surge suppressor protects the one device plugged into it. A whole-home surge protector, installed at the main panel, protects every circuit in the house at once. In a region where summer thunderstorms are frequent and intense, that distinction matters. A single nearby lightning strike or a grid fluctuation can damage appliances, electronics, and HVAC equipment in seconds. We install whole-home surge protection as a standalone upgrade or alongside a panel replacement. One number. One call. One electrician at your door.
Electric vehicles are becoming more common across Bryan and the wider region, and the demand for Level 2 home charging has grown with them. A Level 2 EV charger cuts charging time dramatically compared to a standard 120-volt outlet, and it requires a dedicated 240-volt circuit wired to the panel. Before we install the charger, we check your panel's available capacity to make sure it can handle the added load without creating problems elsewhere in the home. We handle the wiring, the outlet or hardwired connection, and the circuit from panel to garage. Experienced electricians who respect your home show up, do the work cleanly, and leave the space the way they found it. Call today and we'll set the appointment.
Scheduling an electrician shouldn't be complicated. We give you a straightforward quote before any work begins, so there are no surprise charges when the job is done. If you want to know what a repair, installation, or upgrade is likely to cost, the fastest way to find out is to call and describe what you are dealing with. We offer same-day availability for urgent situations and can typically schedule non-emergency work within the week. Whether you need one outlet replaced or a full panel upgrade, the process is the same: call, get a quote, pick a time that works. One number. One call. One electrician at your door.
Call (979) 356-2994 for a quote.
Yes, we keep same-day availability open for urgent calls whenever scheduling allows. If something feels wrong with your electrical system, call (979) 356-2994 and we will do our best to get someone out the same day. Non-emergency work is typically scheduled within the week.
We are available every day from 5:30 AM to 8:00 PM, including weekends. If you have an urgent situation outside those hours, call (979) 356-2994 and we will work with you on next steps. We try to stay flexible because electrical problems do not always happen at convenient times.
Stop using that outlet or circuit immediately and do not try to reset or touch the panel if it is making unusual sounds or feels warm. If you can safely do so, turn off the breaker feeding that area and call us right away. These are signs of a real electrical hazard and should not wait.
We start with a diagnosis before any work begins. The electrician will assess the problem, explain what they found in plain terms, and give you a clear quote before touching anything. Once you approve the work, we get it done and walk you through the result before we leave.
A breaker that keeps tripping is telling you there is an underlying problem, whether that is an overloaded circuit, a wiring fault, or a failing breaker. Repeatedly resetting it without addressing the cause is not a fix and can create a safety hazard over time. Call us so we can find out what is actually going on.
You call, describe what you are seeing, and we get someone scheduled. The electrician arrives, diagnoses the issue, explains the findings, and provides a quote. Once you approve, we complete the work and test everything before we leave.
Yes, we serve customers throughout Brazos County and into the surrounding area. College Station accounts for a large share of our calls, and we regularly work in Hearne, Calvert, Madisonville, Navasota, and Brenham as well. If you are not sure whether we cover your location, just call and ask.
Yes. Work performed by licensed electricians follows current electrical code, and we pull permits where the job requires them. We do not cut corners on code compliance because that is what keeps the work safe and protects the property long term.
Bryan is our home base, and we serve customers throughout Brazos County and into the surrounding communities. If you are in College Station, Hearne, Calvert, Madisonville, Navasota, or Huntsville, we can get to you. We know the neighborhoods, the housing stock, and the kinds of electrical issues that come up in this part of Texas. That local knowledge matters when you are trying to get a job done right the first time.
Casiano Electric has been doing this work since 2005, and every job we take on reflects that history. If you are ready to schedule or just want to talk through what you are seeing, call (979) 356-2994 and we will take it from there.
We handle the full range of residential and commercial electrical work, from a single dead outlet to a complete service upgrade. Whether you are dealing with a tripping breaker, planning a home addition, or looking to add a whole-home generator, we bring the same care to every job. The table below covers what each service includes, who it fits best, and a practical note to help you decide where to start.
| Type of Work | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| Wiring for Additions & Remodels | rough-in wiring for new spaces, circuit additions for remodels, wiring through final inspection, code-compliant installation throughout | homeowners finishing a room, adding a garage, or expanding a living space | We handle the wiring from rough-in through final inspection so the addition is ready for occupancy without delays. |
| Basement & Sump-Pump Circuits | dedicated circuit for sump pump, GFCI protection in damp areas, backup circuit options, wiring for basement finishing | homeowners adding a sump pump or finishing a basement space that needs proper electrical coverage | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit keeps it running independently of other loads. |
| Older-Home Rewiring | knob-and-tube wiring replacement, aluminum branch circuit remediation, whole-home or partial rewiring, code-compliant wiring throughout | owners of established homes with aging wiring that raises safety or insurance concerns | Knob-and-tube and aluminum branch circuit wiring are common in older Bryan homes and can affect insurance coverage. We assess what is there and explain the options clearly. |
| Lighting Installation | recessed and LED fixtures, security and motion-sensor lighting, landscape and pathway lighting, pendant and chandelier installation | homeowners upgrading interior lighting or adding outdoor security and accent lighting | Outdoor lighting in Brazos County takes a beating from heat and storm moisture. Weatherproof fixtures and proper grounding matter here. |
| Ceiling Fan Installation | fan and wiring installation, new ceiling box where needed, switch and remote wiring, replacement of existing fans | any room where a fan is being added for the first time or an old fan needs replacing | If there is no existing wiring in the ceiling, we run the circuit and install a proper fan-rated box before the fan goes up. |
| Breaker & Fuse Repair | breaker replacement, fuse box troubleshooting, panel fault diagnosis, breaker that will not hold reset | homes or businesses with a breaker that trips repeatedly or a fuse that keeps blowing | A breaker that trips on the same circuit every time points to an underlying fault, not just an overload. We find the cause before replacing anything. |
| EV Charger Installation | dedicated 240-volt circuit, panel capacity check before install, outlet or hardwired Level 2 connection, wiring from panel to garage | electric vehicle owners who want faster home charging without relying on a standard 120-volt outlet | We check your panel's available capacity first. If an upgrade is needed to support the added load, we explain the options before any work begins. |
| Electrical Panel UpgradesMost Popular | 200-amp service upgrades, fuse box to breaker panel conversion, subpanel installation, load calculation before any upgrade | homes with an aging or undersized panel that struggles during peak cooling season or when major appliances run together | Bryan summers push electrical systems hard. We size the new panel to your actual load, not just the minimum, so you have room to grow. |
| Electrical Repairs & Troubleshooting | dead outlets and switches, flickering or dimming lights, tripping breakers, circuit diagnosis from panel to fixture | any homeowner or business owner noticing something off with their electrical system | Warm outlets, buzzing sounds, or burning smells are same-day calls. Do not wait on those. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, protection for all circuits at once, standalone upgrade or add-on with panel work | any home in a region with frequent thunderstorms or grid fluctuations | A power strip only protects what is plugged into it. A whole-home unit at the panel protects every circuit in the house from a single lightning strike or surge. |
| Electrical Safety Inspections | whole-home wiring review, panel and grounding check, GFCI and AFCI coverage audit, written findings and recommendations | buyers, sellers, and owners of older homes who want a clear picture of the electrical system's condition | An inspection before a purchase or renovation can surface problems that are far cheaper to address early than after walls are closed up. |
| Outlet & Switch Installation | standard and USB outlets, GFCI and AFCI protection, weatherproof exterior outlets, dimmer and smart switches | homeowners adding outlets to a room, upgrading to code-required GFCI protection, or replacing worn receptacles | Kitchens, bathrooms, garages, and outdoor areas in Bryan require GFCI protection under current code. Work performed by licensed electricians ensures it goes in correctly. |
| Dedicated Appliance Circuits | 240-volt circuits for dryers and ranges, circuits for refrigerators and dishwashers, workshop and garage circuits, circuit sizing for the specific appliance | anyone adding a large appliance or upgrading to an electric range who wants to avoid tripped breakers and overloaded wiring | A shared circuit for a high-draw appliance is a common cause of repeated breaker trips. A dedicated circuit sized for the load solves the problem for good. |
| Backup Generator Installation | transfer switch installation, interlock kit hookup, wiring from generator to panel, manual and automatic transfer switches | families and businesses that need power continuity during storms or grid outages | We handle the electrical side: the wiring, the transfer switch, and the panel connection. The result is a safe, code-compliant hookup ready when the grid goes down. |
How do I know if my electrical panel needs to be upgraded?
A few signs point clearly to a panel that has reached its limits. If breakers trip regularly when you run the air conditioning alongside other appliances, if you are adding a major appliance or EV charger and the panel has no open slots, or if you have an older fuse box rather than a breaker panel, those are all good reasons to call. We run a load calculation to see what the panel is actually handling before recommending an upgrade, so you get an honest answer rather than a guess.
What causes a breaker to keep tripping on the same circuit?
A breaker that trips repeatedly on the same circuit is usually telling you one of three things: the circuit is overloaded by too many devices, there is a wiring fault somewhere on that run, or the breaker itself is failing. Resetting it without finding the cause is not a fix. We diagnose the circuit first, find out what is actually happening, and then repair or replace what needs attention.
Is the electrical work permitted and inspected to code?
Yes. Work performed by licensed electricians follows current electrical code, and we pull permits where the job requires them. Permitted work protects you when you sell the home and ensures the installation is inspected by a third party. We do not skip that step.
Same-Day Availability for Urgent Calls
We keep time open for urgent situations so you are not waiting days when something feels wrong. Call us and we will do our best to get someone out the same day.
How do I know if my older home needs to be rewired?
Homes built before the 1970s may still have knob-and-tube or aluminum branch circuit wiring. Both carry real safety concerns and can affect your homeowner's insurance. Signs that rewiring may be needed include outlets with no ground slot, frequent breaker trips with no clear cause, or a home inspection report that flags the wiring type. We can assess what is there and walk you through the options without pressure.
What do I need for a Level 2 EV charger at home?
A Level 2 charger requires a dedicated 240-volt circuit run from your electrical panel to the charger location, typically the garage. Before we install anything, we check your panel's available capacity to confirm it can support the added load. If the panel needs an upgrade to handle it safely, we explain that before any work begins. The installation covers the circuit, the wiring, and the outlet or hardwired connection.
Can you handle generator hookups for my home?
Yes. We handle the electrical side of generator installation: running the wiring from the generator to the panel, installing the transfer switch or interlock kit, and making sure the connection is safe and code-compliant. We work with manual transfer switches, automatic transfer switches, and interlock kits depending on your setup. A proper transfer switch is required to safely connect a generator to your home's wiring.
Upfront Quotes With No Surprise Fees
We give you a clear quote before any work begins. You know what the job costs before we pick up a tool, and that number does not change when the invoice arrives.
Do I need to be home when the electrician comes?
For most work, yes. We need access to the panel, the areas where we are working, and the circuit breakers. An adult should be present so we can walk through what we found and get approval before work begins. If your situation requires a different arrangement, call us and we will figure out what makes sense.
How does pricing and quoting work?
We give you a clear quote before any work begins. The fastest way to get a number is to call and describe what you are dealing with. For straightforward jobs, we can often give you a range on the phone. For larger projects, we schedule a visit, assess the scope, and provide a written quote before touching anything. There are no surprise charges added after the fact.
Experienced With Older and Newer Homes
We have seen the wiring challenges that come with both newer construction and homes that have been standing for decades. Whatever the house, we know what to look for and how to handle it.
Do you offer same-day service for urgent electrical problems?
Yes, we keep same-day availability open for urgent calls whenever scheduling allows. If you are dealing with a warm outlet, a sparking panel, a breaker that will not reset, or any situation that feels like a real hazard, call us the same day. Non-emergency work is typically scheduled within the week.
Why would outlets or switches stop working suddenly?
A dead outlet or switch usually has one of a few causes: a tripped GFCI outlet upstream that cut power to a whole run, a loose or failed connection at the device or in the box, or a tripped breaker. Some GFCI outlets protect multiple outlets on the same circuit, so a tripped GFCI in the bathroom can kill outlets elsewhere in the house. If resetting the GFCI does not restore power, or if you cannot find a tripped breaker, that is a good time to call.
What does whole-home surge protection actually do that a power strip does not?
A surge-protecting power strip only covers the devices plugged directly into it. A whole-home surge protector is installed at the main panel and intercepts a voltage spike before it reaches any circuit in the house. In an area where summer thunderstorms roll through regularly, a single nearby lightning strike or a grid fluctuation can damage appliances, electronics, and other equipment in seconds. A panel-level unit protects everything at once.
Every job is different, and the best way to get an accurate answer for your situation is to call us directly at (979) 356-2994 and walk us through what you are seeing.
(979) 356-2994